-- *****************************************************************
-- CISCO-ACCESS-ENVMON-MIB.my: CISCO ACCESS ENVMON MIB file
--
-- November 1996 Hongchi Shih
--
-- Copyright (c) 1996, 1997, 1998 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************CISCO-ACCESS-ENVMON-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPEFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
ciscoEnvMonSupplyStatusEntry,ciscoEnvMonTemperatureStatusDescr,ciscoEnvMonTemperatureState,ciscoEnvMonVoltageStatusDescr,ciscoEnvMonVoltageState
FROM CISCO-ENVMON-MIB
ciscoMgmt
FROM CISCO-SMI;ciscoAccessEnvMonMIB MODULE-IDENTITYLAST-UPDATED"9808050000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"DESCRIPTION"The MIB module to describe the additional status of
the Environmental Monitor on those Cisco Access devices
which support one.
"REVISION"9808050000Z"DESCRIPTION"Rename the enumerated values for caemSupplyFailedComponent
and add fan, overvoltage failure events to it.
Add caemVoltageNotification.
"::={ ciscoMgmt 61}-- Cisco Access Environmental Monitor MIB objects definitionscaemObjects OBJECTIDENTIFIER::={ ciscoAccessEnvMonMIB 1}--
-- Cisco Access Environmental Monitor power supply table
-- This table augments the ciscoEnvMonSupplyStatusTable defined in
-- CISCO-ENVMON-MIB.
--caemSupplyStatusTable OBJECT-TYPESYNTAXSEQUENCEOF CaemSupplyStatusEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The table contains the additional power supply information
that are not covered in the ciscoEnvMonSupplyStatusTable of
CISCO-ENVMON-MIB.
"::={ caemObjects 1}caemSupplyStatusEntry OBJECT-TYPESYNTAX CaemSupplyStatusEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Additional information about the failure component or location
in the power Supply beyond that provided by Cisco Environmental
Monitor MIB's ciscoEnvMonSupplyStatusEntry.
"AUGMENTS{ ciscoEnvMonSupplyStatusEntry }::={ caemSupplyStatusTable 1}
CaemSupplyStatusEntry ::=SEQUENCE{
caemSupplyFailedComponent INTEGER}caemSupplyFailedComponent OBJECT-TYPESYNTAXINTEGER{
none (1),inputVoltage (2),dcOutputVoltage (3),thermal (4),multiple (5),fan (6),overvoltage (7)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The failure component of the power supply being instrumented.
none - No failure.
inputVoltage - Input power lost in one of the power supplies
dcOutputVoltage - DC output voltage lost in one of the power supplies
thermal - Power supply thermal failure.
multiple - Multiple failures.
fan - Fan failure
overvoltage - Over voltage.
"::={ caemSupplyStatusEntry 1}--****************************************************************************
-- Notifications
--****************************************************************************caemMIBNotificationPrefix
OBJECTIDENTIFIER::={ ciscoAccessEnvMonMIB 2}caemMIBNotifications
OBJECTIDENTIFIER::={ caemMIBNotificationPrefix 0}caemTemperatureNotification NOTIFICATION-TYPEOBJECTS{
ciscoEnvMonTemperatureStatusDescr,
ciscoEnvMonTemperatureState
}STATUScurrentDESCRIPTION"A caemTemperatureNotification is sent if the over temperature
condition is detected in the managed system.
This is a replacement for the ciscoEnvMonTemperatureNotification
trap because the information 'ciscoEnvMonTemperatureStatusValue'
required by the trap is not available in the managed system.
"::={ caemMIBNotifications 1}caemVoltageNotification NOTIFICATION-TYPEOBJECTS{
ciscoEnvMonVoltageStatusDescr,
ciscoEnvMonVoltageState
}
STATUScurrentDESCRIPTION"A caemVoltageNotification is sent if the over voltage
condition is detected and ciscoEnvMonVoltageState is not set
to 'notPresent' in the managed system.
This is a replacement for the ciscoEnvMonVoltageNotification
trap because the information 'ciscoEnvMonVoltageStatusValue'
required by the trap is not available in the managed system.
"::={ caemMIBNotifications 2}caemConformance OBJECTIDENTIFIER::={ ciscoAccessEnvMonMIB 3}caemCompliances OBJECTIDENTIFIER::={ caemConformance 1}caemGroups OBJECTIDENTIFIER::={ caemConformance 2}-- compliance statementscaemCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement
the Cisco Environmental Monitor Supplemental MIB."MODULE-- this moduleMANDATORY-GROUPS{ caemGroup }::={ caemCompliances 1}-- units of conformancecaemGroup OBJECT-GROUPOBJECTS{
caemSupplyFailedComponent
}STATUScurrentDESCRIPTION"A collection of objects providing the additional Environmental
Monitor information beyond that provided by
Cisco Environmental Monitor MIB.
"::={ caemGroups 1}END